Floating Dock
- Lifting Capacity……………………… 4500 tons.
- Length…………………………………....100 m
- Breadth (int)………………………………23.3 m
- Two cranes………………………………5 tons each.
Services to dry-docked vessels
- Shore power supply: 380 v/50 Hz, 440v/60 Hz.
- Compressed air.
- Fresh water supply.
- Salt water supply for ballast, fire fighting and cooling purposes.
- Telephone connection.
- Protection System and Extinction of Fire.
Berthing
Wharf # Length Cranes
3 90 m (295.3 ft) 10 tons / 30 m (98.5 ft)
4 222 m (242.8 ft) 16 tons / 45 m (147.6 ft)
5 128 m (420 ft) 10 tons / 30 m (98.5 ft)
Pier 126 m (413.4 ft) 10 tons / 30 m (98.5 ft)
Services in Berth
- Power supply: 440v/60 Hz.
- Compressed air.
- Salt water supply for ballast, fire fighting and cooling purposes.
- Protection System and Extinction of Fire.
Steel Workshop
- Steel and aluminum plates’ renewal.
- Mc Gregor hatch cover repairs.
- Supply and installation of cathodic protection.
Surfaces Conservation Workshop
- Scrapping.
- Water washing with FW.
- Water blasting up to 300 Kg/cm².
- Chemical degreasing.
- Grit blasting up to SA 2 ½.
- Air less spray painting of surfaces.
- Cleaning fuel and ballast tanks.
Piping Workshop
- Construction and repair of all type of pipe systems: fresh water, salt water(ballast, fire fighting, cooling and bailing systems), oil, compressed air, hydraulic, sanitary, etc.
- Repair, renewal and testing of all types of valves, including bottom valves.
Mechanics and Machining Workshop
- Steering gears systems and propulsion mechanisms repairs, including controlled pitch propeller systems.
- Propeller repairs.
- Mechanical and chemical cleaning, rebuilding and repair of heat exchangers.
- Diesel engines and turbochargers repairs.
- Tail shaft and rudder systems repairs.
- Main and auxiliary diesel engines overhauling and repairs.
- Alignment of machinery. Chock fast resining.
- Deck and auxiliary naval machinery repairs.
- Machining works.
- PV valves repairs.
Installations and Electric Equipment Workshop
- Repairs of: AC and DC electric motors and generation units, switchboards, controls, transformers, power and lighting systems
- Electric rewinding up to 250 Kw.
- Low and medium tension electric switchboards fabrication.
Carpentry Workshop
- Carpentry works in general
- Manufacture of naval furniture.
- Works with epoxy resin and fiber glass.
- Repair and renewal of cargo hold and hatch cover insulation.
Life-rafts Services Station
- Unique in all the country specialized in checking up and repair of life-rafts.
- Change of outfit and pyrotechnics.
- Certified by the following makers: Toyo Rubber from Japan, QJF from China, Duarry S.A. from Spain and RF and DSB Continental from Germany.
Metallographic Laboratory
- Non Destructive Test
- Ultrasonic thickness Calibration.
- Hardness Testing.
